|
(Click images to see larger view)
-
Make sure the unit is unplugged. Lift the lid and add approximately one
to two standard ice trays of ice cubes (12-24 cubes) into the machine. Make sure
ice is not trapped between the roller and the side ribs.
-
Pour approximately two cups of water (16 oz.) into the ice-water bin. Check
to see if the ice-water bath is above the minimum fill line, but not over the
maximum fill line.
-
Make sure the unit is on a clean, dry, level surface and plug the electrical
cord into an appropriate outlet. Lift the lid and place your beverage container horizontally onto
the roller with the container neck facing out. For maximum cooling results, the
container should be resting on the right hand side.
-
Close the lid and secure the removable front lid cap. Check to make sure
the lid is securely down to prevent water from leaking.
-
If your container has a long neck, such as with a typical wine bottle, remove
the front lid cap by sliding it downward. This will allow the neck to stick out
of the unit.
-
Choose the desired setting on the electronic touch pad timer to chill your
beverage.
Back to Top
|
when
you need to Chill-On-Demand™ 
